A good refrigerator should give you several years of good service with no issues. Whether you are using it in a commercial setup or at your home, this is what is expected. However, this is not usually the case. After some years, some refrigerators start experiencing a rise in temperature. This is usually due to warm air that somehow gets into the refrigeration system even when you have shut the door completely. When this happens, the first thing that many technicians recommend is the inspection of the condition of the refrigeration gaskets Atlanta.
A refrigeration gasket is that strip that you will find on the door edges of your refrigerator door. It is usually made of rubber and its main purpose is to keep the refrigerator door tightly shut. This prevents the entry of any warm air into the fridge. It also keeps the cold air in when the door is closed.
Apart from the gasket, modern refrigerators also contain magnets. These magnets support the gasket and give the door an extra grip. This helps keep the door shut tightly.
Gaskets usually wear out after some time. They loosen the grip on the door and this allows warm air to get into the refrigeration system and increase the temperature. This has a negative impact as it prevents frost buildup on the cooling coils.
The overall effect of the warm air is negative on the entire system of refrigeration. The refrigerator also ends up consuming more energy during the defrost cycle. This in turns impacts the efficiency of the refrigerator.
Identifying a faulty gasket is simple and will only take a few minutes. One needs to be sure that the gasket is the issue of the poor performance of the refrigerator before one can replace it. A simple technique can help you do this.
A visual inspection of the gasket is the most direct method. You will need to look all around the edges of the door to identify any cracks, mold buildup or any presence of any decaying food on the gasket. You also need to confirm that the gasket is fitted properly.
If the visual inspection results are good and the gasket seems proper, the next step is to check the strength of its seal. You can confirm this by slipping a bill on the door and shutting it. Normally when the gasket is in proper shape, you should experience resistance when trying to pull the bill out. If little or no resistance is encountered, then the gasket is faulty and needs to be replaced. Repeat this step at all points to be sure.
The magnetic strip gaskets in the modernly designed refrigerators are easier to replace when compared to the old designs. However, you need to identify the type of gasket you have so you can get the exact same one. In a commercial setup where there are different types of refrigerators, this is not a simple task. Different refrigerator manufacturers use different types of gaskets.
A gasket consultant is your best bet in getting the right gasket replacement for your refrigerator. Remember, if you replace the gasket with the wrong one, you may not solve your problem at all. A consultant will not only help you identify the right one but will also help you install it and inspect it thereafter to ensure it does the job right.
A refrigeration gasket is that strip that you will find on the door edges of your refrigerator door. It is usually made of rubber and its main purpose is to keep the refrigerator door tightly shut. This prevents the entry of any warm air into the fridge. It also keeps the cold air in when the door is closed.
Apart from the gasket, modern refrigerators also contain magnets. These magnets support the gasket and give the door an extra grip. This helps keep the door shut tightly.
Gaskets usually wear out after some time. They loosen the grip on the door and this allows warm air to get into the refrigeration system and increase the temperature. This has a negative impact as it prevents frost buildup on the cooling coils.
The overall effect of the warm air is negative on the entire system of refrigeration. The refrigerator also ends up consuming more energy during the defrost cycle. This in turns impacts the efficiency of the refrigerator.
Identifying a faulty gasket is simple and will only take a few minutes. One needs to be sure that the gasket is the issue of the poor performance of the refrigerator before one can replace it. A simple technique can help you do this.
A visual inspection of the gasket is the most direct method. You will need to look all around the edges of the door to identify any cracks, mold buildup or any presence of any decaying food on the gasket. You also need to confirm that the gasket is fitted properly.
If the visual inspection results are good and the gasket seems proper, the next step is to check the strength of its seal. You can confirm this by slipping a bill on the door and shutting it. Normally when the gasket is in proper shape, you should experience resistance when trying to pull the bill out. If little or no resistance is encountered, then the gasket is faulty and needs to be replaced. Repeat this step at all points to be sure.
The magnetic strip gaskets in the modernly designed refrigerators are easier to replace when compared to the old designs. However, you need to identify the type of gasket you have so you can get the exact same one. In a commercial setup where there are different types of refrigerators, this is not a simple task. Different refrigerator manufacturers use different types of gaskets.
A gasket consultant is your best bet in getting the right gasket replacement for your refrigerator. Remember, if you replace the gasket with the wrong one, you may not solve your problem at all. A consultant will not only help you identify the right one but will also help you install it and inspect it thereafter to ensure it does the job right.
About the Author:
You can get valuable tips on how to choose an installer of refrigeration gaskets Atlanta area and more information about a knowledgeable installer at http://www.inspectorgaskets.com/services now.
No comments:
Post a Comment